Fuji Supria 32

“Supria 32” meets Healthcare Needs

With the aging population around the world, demand for reducing the physical burden on patients is increasing in the medical field.

Furthermore, there is a demand for optimalized and efficient hospital management that responds to the variety of healthcare needs.

We resolve the challenges faced in the medical practice with our CT system Supria 32 that meets healthcare’s present and future needs.

“Supria 32” meets Patient Friendly

Iterative processing for routine examinations

To use the iterative processing (Intelli IP), a noise reduction technology, more efficiently on routine examinations, reconstruction speed has been improved by 50% compared to the Conventional CT. In addition, the intensity of noise reduction can be selected from seven levels, providing high quality images with appropriate exposure dose, image noise reduction and artifact reduction based on the operation guideline at clincal sites.

Figure 1.0

High throughput, high image quality

High performance, such as high-speed rotation, submillimeter slice imaging, powerful X-ray generator and state-of-the-art image reconstruction algorithms, realizes high resolution and high throughput examinations.
Figure 2.0
—

Submillimeter slice imaging for high resolution and high quality images

Supria 32 realizes high resolution images in a short time based on 0.625mm x 16ch scanning. In addition, high resolution and smooth 3D images and MPR images can be achieved by submillimeter slice scanning. Oblique images by MPR can be also achieved after scanning.
Figure 3.0
—

High quality imaging with the gantry tilt

The gantry has a function of tilting within a range of ± 30 degrees, which is possible to reduce exposure to highly radiation sensitive tissues. In addition, excellent, high-quality images with low contrast can be achieved by normal scan of the head, compared to volume scan. This imaging method takes into account exposure to the patient as well as image quality.
Figure 4.0
—

High efficiency powerful X-ray generator

Our technology enabled us to develop a powerful and high efficiency X-ray generator. It achieves sufficient output with a compact power supply facility. It can also cover heavy load examinations in the X-ray tube, such as wide-area imaging and multi-phase imaging.
Figure 5.0
—

HiMAR reduces metal artifacts

HiMAR (High Quality Metal Artifact Reduction) adopts unique algorithms for estimating and correcting artifacts based on metal data.
Figure 6.0
—

Capable of imaging in various patient’s positions

With a large bore of 750mm, and a maximum effective field of view that reduces patient anxiety, it is possible to scan the patient in various positions.

ECG Prospective scanning in synchronization with electrocardiogram

ECG Prospective scanning is a function that scans and achieves image in synchronization with electrocardiographic information. Images achieved by ECG Prospective scanning can be used for calcium scoring analysis*1.

*1 A 3D workstation equipped with a calcium scoring analysis is required.

Helpful function to reduce the burden on the patient

As Supria 32 is equipped with a motion artifact correction, body movement can be compensated even after scanning. Even if the patient is out of the effective field of view, such as a patient with a kyphosis, images can be reconstructed without re-scanning in case it is within the maximum effective field of view.

Figure 7.0

Service Regions:

We service VIC, ACT, NSW, QLD, NT, WA, SA, and TAS with national install and support coverage. Read more about the areas we service in each Australian state/territory.